Phase 4 problems
Moderators: Stardust@home Team, DustMods
-
- Posts: 190
- Joined: Fri Aug 04, 2006 4:38 am
- Location: Massachusetts, USA
Phase 4 problems
Where are my Events Lists for Phases 3 and 4? I have the headings, but no movies listed. I have only just started dusting in this phase, but the 2 movies I have clicked on as having potential tracks were recorded only on "movies viewed." They did not go on my Events List or listed as power movies. The little box I used to get saying "Are you sure you want to select this movie" or something like that has disappeared altogether. I have clicked "no track" on a couple which were not counted at all. I don't see the point of dusting if my movies are not even going to be recorded!
Also, I have missed both the power movies I have received so far. Both features were on the surface. Does this mean we should also click on surface features now? (I was not able to view most of the tutorial because the download time was so long.)
I see some smileys are still missing, too.
Lots of bugs, I think.
P.S. I use MSN.
Also, I have missed both the power movies I have received so far. Both features were on the surface. Does this mean we should also click on surface features now? (I was not able to view most of the tutorial because the download time was so long.)
I see some smileys are still missing, too.
Lots of bugs, I think.
P.S. I use MSN.
Re: Phase 4 problems
I too am not getting my selections recorded in the events list. On the possibility of missing a valid track I will suspend my dusting till this is corrected. Elaine it seems that a lot of the power films do have tracks very close to the surface. I can see them slightly out of focus from the surface.
Re: Phase 4 problems
Should be fixed. Thanks for letting us know.
Stardustathome admins
Stardustathome admins
Re: Phase 4 problems
Sorry for the troubles. Is the box back now?elainekeefe wrote:The little box I used to get saying "Are you sure you want to select this movie" or something like that has disappeared altogether.
elainekeefe wrote:I have clicked "no track" on a couple which were not counted at all.
A click of "No Track" would not send the movie to your My Events list. Is this what you meant?
There are many types of tracks now, including types from Phases 1-3, so a review of the tutorial again would help, as would clicking on the "Examples" button in the VM.elainekeefe wrote:Also, I have missed both the power movies I have received so far. Both features were on the surface. Does this mean we should also click on surface features now?
But keep us posted!
Dan
-
- Posts: 190
- Joined: Fri Aug 04, 2006 4:38 am
- Location: Massachusetts, USA
Re: Phase 4 problems
Hi Dan,
No, the box is not back. My events are being recorded now, however. When I said I clicked no track and nothing happened, I mean that the movie simply wasn't counted...anywhere. That hasn't happened since the very beginning though, so maybe I did something wrong.
My Phase 3 movies are still not all there. The first movie is the same on Both Phases 3 and 4. (I didn't check the rest.) I don't remember how many I had, but certainly more than the 6 or so that are showing up. I also have clicked on two power movies and received an error because I did not click in the right spot. We used to click on the particle at the end of the track, but now it seems we're supposed to click in the middle of the track? I'm somewhat confused by this, because looking at the missed power movies afterwards, some are highlighted at the particle, some in the middle of the track. Which is it? I was not off by that much either time. Has the area we can click in and still be right been decreased? I know we are supposed to click on the deepest part, but sometimes that is difficult to discern.
Thanks, Elaine
P.S. Here is the most recent power movie I got wrong. I clicked on the particle. The middle is highlighted as being the correct location.
http://stardustathome.ssl.berkeley.edu/ ... 8&theY=152
No, the box is not back. My events are being recorded now, however. When I said I clicked no track and nothing happened, I mean that the movie simply wasn't counted...anywhere. That hasn't happened since the very beginning though, so maybe I did something wrong.
My Phase 3 movies are still not all there. The first movie is the same on Both Phases 3 and 4. (I didn't check the rest.) I don't remember how many I had, but certainly more than the 6 or so that are showing up. I also have clicked on two power movies and received an error because I did not click in the right spot. We used to click on the particle at the end of the track, but now it seems we're supposed to click in the middle of the track? I'm somewhat confused by this, because looking at the missed power movies afterwards, some are highlighted at the particle, some in the middle of the track. Which is it? I was not off by that much either time. Has the area we can click in and still be right been decreased? I know we are supposed to click on the deepest part, but sometimes that is difficult to discern.
Thanks, Elaine
P.S. Here is the most recent power movie I got wrong. I clicked on the particle. The middle is highlighted as being the correct location.
http://stardustathome.ssl.berkeley.edu/ ... 8&theY=152
Re: Phase 4 problems
"P.S. Here is the most recent power movie I got wrong. I clicked on the particle. The middle is highlighted as being the correct location."
Actually Elaine if you were to select the mid point of the red bar indicators and clicked at their intersection you would be well outside the parameters for a correct identification of the track. Like you I have been clicking on the particle - "the deepest part even if out of focus" and have been rewarded sometimes and at other times marked down.
Phil
Actually Elaine if you were to select the mid point of the red bar indicators and clicked at their intersection you would be well outside the parameters for a correct identification of the track. Like you I have been clicking on the particle - "the deepest part even if out of focus" and have been rewarded sometimes and at other times marked down.
Phil
-
- Posts: 190
- Joined: Fri Aug 04, 2006 4:38 am
- Location: Massachusetts, USA
Re: Phase 4 problems
Here are two more movies on my incorrect power movies list:
I don't recall if I even clicked on anything here, but the red location bars seem to be in the wrong place:
http://stardustathome.ssl.berkeley.edu/ ... 3&theY=104
In this one, I clicked on the uppermost particle out of 3. Evidently I picked the wrong one. Either of the other 2 would have been fine. How are we to know which one to click on?
http://stardustathome.ssl.berkeley.edu/ ... 7&theY=232
I don't recall if I even clicked on anything here, but the red location bars seem to be in the wrong place:
http://stardustathome.ssl.berkeley.edu/ ... 3&theY=104
In this one, I clicked on the uppermost particle out of 3. Evidently I picked the wrong one. Either of the other 2 would have been fine. How are we to know which one to click on?
http://stardustathome.ssl.berkeley.edu/ ... 7&theY=232
Re: Phase 4 problems
Re: the Little Box. We removed that code, it only showed the "Are you sure" box under some browsers to correct a bug in older versions of that browser (I can't recall which browsers right now). It was no longer required.elainekeefe wrote:The little box I used to get saying "Are you sure you want to select this movie" or something like that has disappeared altogether.
Robert
Re: Phase 4 problems
I find that my Phase III Events and Rankings are the results of Phase II, which is correctly posted.
In Phase IV, the first movie I looked at had a clear track. I clicked on the deepest part and was rewarded with an error on a two point power movie, the two points signifying how clear the track was.
David
In Phase IV, the first movie I looked at had a clear track. I clicked on the deepest part and was rewarded with an error on a two point power movie, the two points signifying how clear the track was.
David
Re: Phase 4 problems
I'm having the same problem, a "lost" a couple of power movies (easy ones) today for example, I clicked them but the were marked as "missed":
http://stardustathome.ssl.berkeley.edu/ ... 9&theY=281
http://stardustathome.ssl.berkeley.edu/ ... 8&theY=104
I think what some adjustment is needed is this area
http://stardustathome.ssl.berkeley.edu/ ... 9&theY=281
http://stardustathome.ssl.berkeley.edu/ ... 8&theY=104
I think what some adjustment is needed is this area
Last edited by Shigeru on Fri Jul 15, 2011 10:06 am, edited 1 time in total.
-
- Posts: 190
- Joined: Fri Aug 04, 2006 4:38 am
- Location: Massachusetts, USA
Re: Phase 4 problems
Wow, in the bottom movie, the highlighted parameters aren't even close! (Unless we are actually supposed to click on that truly invisible spot that is located there.) There seem to be many errors in this phase. Hardly seems worth dusting when no matter what you do, you're going to be wrong.
Re: Phase 4 problems
Again!
http://stardustathome.ssl.berkeley.edu/ ... 43&theY=34
And this time I clicked inside of the designated area...
http://stardustathome.ssl.berkeley.edu/ ... 43&theY=34
And this time I clicked inside of the designated area...
Re: Phase 4 problems
Thanks for the links to the badly tagged Power Movies. We're working on those!
What about Phase 3 stats? I think those are correct now. See http://stardustathome.ssl.berkeley.edu/p3_rankings.php
Dan
What about Phase 3 stats? I think those are correct now. See http://stardustathome.ssl.berkeley.edu/p3_rankings.php
Dan
Re: Phase 4 problems
Dan, my Phase III Events and Rankings are now correctly displayed. I thank you and all for effort to correct that.
David
David
Re: Phase 4 problems
Cool! I'm sure that the team could fix the problems
My Phase III Ranking is Ok! But how I see my Phase III Events?
P.D.: The new difficult is pretty hard, that's is a fact
EDIT: Ok, another one, this of value 2... I clicked right in the track and was marked a missed
http://stardustathome.ssl.berkeley.edu/ ... 7&theY=304
My Phase III Ranking is Ok! But how I see my Phase III Events?
P.D.: The new difficult is pretty hard, that's is a fact
EDIT: Ok, another one, this of value 2... I clicked right in the track and was marked a missed
http://stardustathome.ssl.berkeley.edu/ ... 7&theY=304