"There's a problem with this focus movie"
Moderators: Stardust@home Team, DustMods
Re: "There's a problem with this focus movie"
Here's another problem PM - 4241772V1. It's supposedly a 2-pointer, and the track does seem obvious leaving the screen at the upper edge, but I got it "wrong." There are no Y coordinate markers, and the X coordinate markers seem shifted to the right of the actual feature. The true coordinates (to me) look like about 90/0; but the X coordinate marker is at 125-150, well right of the track.
It seems like some of the "problem" PMs that had been removed in earlier phases have been reintroduced in this phase, in some cases without having been corrected.
Mike
It seems like some of the "problem" PMs that had been removed in earlier phases have been reintroduced in this phase, in some cases without having been corrected.
Mike
Re: "There's a problem with this focus movie"
Dear Mike and Lily,
Thanks for pointing out these latest issues, mainly:
1. Low value points for difficult to find tracks.
2. Tracks with no X or Y coordinates (which we've seen before).
At the moment, I'm not sure if these represent major system-wide problems, or just isolated cases. They may even be related (e.g., #1 above is a result of #2 if easy tracks are somehow shifted off the screen).
Any thoughts from your points of view?
Dan
Thanks for pointing out these latest issues, mainly:
1. Low value points for difficult to find tracks.
2. Tracks with no X or Y coordinates (which we've seen before).
At the moment, I'm not sure if these represent major system-wide problems, or just isolated cases. They may even be related (e.g., #1 above is a result of #2 if easy tracks are somehow shifted off the screen).
Any thoughts from your points of view?
Dan
Re: "There's a problem with this focus movie"
I've just been presented with this movie: http://aerogel.ssl.berkeley.edu/powermi ... 2&theY=346
First, the lowest "levels" seem to show a different slide than the upper levels. And then there's a track to the left, a little above middle, which I clicked but was missed.
First, the lowest "levels" seem to show a different slide than the upper levels. And then there's a track to the left, a little above middle, which I clicked but was missed.
Re: "There's a problem with this focus movie"
Wow, Digi, I think that's the first one of those I've seen this phase. It is rare switching gel segments in the same movie, and only once before have I seen one that was also a PM. The X & Y coordinate markers for this one do seem correct. There is a faint/subtle vertical "track" at those coordinates - one of the shadowy types.
Dan, no further thoughts on the "problem" PMs mentioned previously. Probably not worth the team's time trying to correct all of them, but we'll keep pointing them out if you want us to do so. They just present additional opportunities to claw one's way back up the skill level after such an unfortunate encounter.
Mike C.
Dan, no further thoughts on the "problem" PMs mentioned previously. Probably not worth the team's time trying to correct all of them, but we'll keep pointing them out if you want us to do so. They just present additional opportunities to claw one's way back up the skill level after such an unfortunate encounter.
Mike C.
Re: "There's a problem with this focus movie"
OK, here's an 18-rated PM that seems to me harder than most 75-80 pointers I've seen. Good luck spotting this one. http://aerogel.ssl.berkeley.edu/powermi ... 20&theY=-5
Re: "There's a problem with this focus movie"
Thanks for the posts, we're looking at these issues right now.
Dan
Dan
Re: "There's a problem with this focus movie"
Here's another one, Dan, that seems to be mismarked. http://aerogel.ssl.berkeley.edu/powermi ... 6&theY=184 shows the coordinates 156/184, but the track is actually at about 110/300. It's an easy 5-pointer, so that really hurts the skill score and ego.
-
- Posts: 47
- Joined: Fri Aug 04, 2006 11:27 pm
- Location: Singapore
Re: "There's a problem with this focus movie"
Well, I've missed this 15-pointer twice now, and although my skill score takes the expected hit, when I go to the events log to check it out, it says something like, "Congratulations, you've missed no power movies this current session!" Anyone else care to try? http://aerogel.ssl.berkeley.edu/myevent ... =2354763V1
Re: "There's a problem with this focus movie"
Hi, Cap, I have searched all over your focus movie and cannot find a track---much less a 15 pointer! I've also had the message, "no missed movies." But, I found that by waiting an hour or so, it will appear. I really like the look of the new Phase VII. A few bugs, but I've adjusted to them. Perhaps another duster can find the track in your posted movie, or maybe DanZ will clue us in. Nice hearing from you, Evelyn ERSTRS, Smith ES
Re: "There's a problem with this focus movie"
Thanks for looking, Evelyn. If I run into it again, I'll try re-checking the events page later.
Re: "There's a problem with this focus movie"
I think the "missed movies this session" calculator runs at intervals, so yes, they may not get listed immediately in your "My Events" page. But regarding this track (and the others posted above), they're a mess! Thanks for posting, I will investigate.
Dan
Dan
-
- Posts: 47
- Joined: Fri Aug 04, 2006 11:27 pm
- Location: Singapore
Re: "There's a problem with this focus movie"
Last edited by voyager1682002 on Sat Dec 06, 2014 11:59 pm, edited 1 time in total.
Re: "There's a problem with this focus movie"
Thanks, Lily. Here's a similar one, http://aerogel.ssl.berkeley.edu/powermi ... 6&theY=124, but off the left edge. The X coordinate is minus 36. If you click on the visible feature as I did, you "miss" an 8-pointer. Mike
-
- Posts: 47
- Joined: Fri Aug 04, 2006 11:27 pm
- Location: Singapore
Re: "There's a problem with this focus movie"
That's worst, Mike. I think it should be worth 80 points!caprarom wrote:Thanks, Lily. Here's a similar one, http://aerogel.ssl.berkeley.edu/powermi ... 6&theY=124, but off the left edge. The X coordinate is minus 36. If you click on the visible feature as I did, you "miss" an 8-pointer. Mike